Excitech Toolkit for Civil 3D

STATION AND OFFSET
The Station and Offset tool calculates station and offset of selected points according to selected reference alignments. This enables the creation of report tables with station and offset data. 

EXTRACT BLOCKS FROM POINTS 
This tool helps you extract blocks that mark Civil 3D COGO points. 

ADD/SUBTRACT SURFACE 
The Add/Subtract Surface tool calculates new surface by adding/subtracting elevation values of selected surfaces.

GRADING 
This powerful grading functionality lets you design various spatial entities with different grading criteria allowing you to save the templates. Edit the source geometry and review the results in real time. 

COPY GRADING
The Copy Grading command lets you copy existing grading definition with all components to a new reference geometry.

JOIN GRADING
This command joins two gradings with similar definitions by creating linear transitions between them.

SPLIT GRADING
The Split grading command splits grading at selected point allowing you to edit each new part individually. 

EDIT GRADING
This video shows the Edit Grading tool for Civil 3D

ERASE GRADING
This video shows the Erase Grading Tool for Civil 3D.

CREATE OFFSET ALIGNMENTS 
Select alignment and create multiple offset alignments in a single instance. You can choose from predefined sets of offset alignments or create and save new lane configurations yourself.

CREATE ALIGNMENT FROM FEATURE LINE 
Create Civil 3D alignment from feature line or 3D polyline element. You can also create a Civil 3D profile if your feature line / 3D polyline has assigned elevations. 

POLYLINE TO LANDXML 
With this function you can save LandXML file directly from polyline, 3D polyline or feature line entity.

JOIN ALIGNMENTS
The Join Alignments command will join selected alignments and optionally alignment profiles.

CREATE OFFSET PROFILE 
Civil 3D does not allow you to create offset on Civil 3D profile. With our tool you can create a Civil 3D profile offset polyline by defining offset value or through point.

LABEL FEATURE LINE IN PROFILE VIEW 
With this command you label feature lines that were projected in profile view. The labels will show exact feature line slopes/grades not the projected slopes/grades. 

CREATE MULTIPLE PROFILES 
This command creates profiles and profile views for multiple alignments. You can select alignments single surface that will be used in all profiles as a reference surface for profile creation.

CORRIDOR SECTION EDITOR 
Corridor section editor allows you to modify corridor by editing the cross sections in section views. It also enables linear transitions of parameters between two stations.

CORRIDOR SPREADSHEET EDITOR 
Corridor Spreadsheet Editor is powerful corridor editing tool that allows you to edit corridor in an MS Excel like editor. It provides possibilities for various kinds of workflows like editing regions, targets and reconstructing corridors in new drawings.

LABEL ASSEMBLIES 
It is handy to label assemblies with their names so you can quickly find the ones you are working on.

ASSEMBLY REPORT
Create an AutoCAD table of a corridor displaying all the different baseline and regions. This report will show each assemblies start and end stations along a corridor.

PIPE ELEVATION
This tool enables you to display pipe elevation and depth at any location along a pipe. Optionally a user can insert a structure or COGO point at a specified location along the pipe. This command will allow the insertion of a structure in profile view.

PIPE EDITOR 
This tool enables you to edit multiple pipes. Use the intuitive user interface to define how pipes should behave and apply changes to the whole pipe set.

STRUCTURE EDITOR 
Making changes to structure and connected pipes is tedious in Civil 3D. This tool enables you to browse through structures with ease and edit the most important pipe and structure parameters.

SWAP MUTIPLE PARTS 
This tool allows you to swap multiple structures and multiple pipes at the same time.

LEVEL SERVICE NETWORK 
This tool allows you to set elevations and grades for all your service lines going into the main without using the structures at connection points. 

CREATE STRUCTURES FROM POINTS  
This tool creates pipe network structures from selected COGO points. Command can be used to automate a pipe network creation process from existing surveyed data.  

CONVERT LINES TO PIPES 
This tool converts selected line, polyline or arc entities to Civil 3D pipe objects. Newly created pipes are automatically connected to the existing structures, which are located at the selected entity start/end point or vertices.

CREATE POINTS ON STRUCTURES 
This tool creates COGO points on selected structures, setting rim or sump as point elevation.

STRUCTURE REPORT 
This tool creates an Excel report of all selected structures and includes all parameters of structures and connected pipes.

REVERSE PIPES
This video shows the Reverse Pipe tool for Civil 3D.

CHECK UTILITY CROSSINGS 
This tool calculates crossings between utility segments (gravity and pressure network pipes), inserts COGO points at crossing locations and marks crossing elevation difference.

PIPE DEPTH ANALYSIS 
This tool creates report of pipe depths. The results are presented in table or graph. 

(No video available)

VISIBILITY MANAGER 
Manage visibility of all Civil 3D objects on a single panel. Make your working area more transparent by toggling the visibility of features on/off.

SECTION NAVIGATOR 
Use this tool to navigate through corridor section views by section navigator panel. Controls allow different ways of browsing through section views. You can also define zoom area to lock navigation to specific area. 

VARIOUS ZOOM TO COMMANDS 
Use this tool to perform quick zoom operations by selecting Civil 3D entities. Select profile or section view and zoom to alignment. Select alignment or section view, or sample line and zoom, to profile. Select sample line and zoom to section view.